The preparation of the surface greatly influences the quality, effectiveness, and life span of a paint job. Coating adherence to the substrate depends on the surface being free of debris, including dust, grime, and grease.
Abrasive water blasting and sandblasting are two of the most common ways industrial painters prepare surfaces today.
If you don’t do it the right way or use waterblasting equipment the wrong way, you could cause localized damage and severe erosion of surfaces.
Even though sandblasting is most often used for metal, it can be used to clean dust, dirt, and old paint off of other surfaces as well.
Two methods of sandblasting are available. It is possible to utilize either wet sandblasting or dry sandblasting, both of which use high-powered streams of water combined with abrasive material to clean a surface. The following are the advantages of both methods:
To get metal ready for painting, sandblasting, pressure washing, or steam cleaning, are sometimes used together. Wet sandblasting, on the other hand, is less harmful since it doesn’t produce toxic dust clouds. Sandblasting projects in certain sections of Florida (e.g., Miami, Long Beach, and Coral Gables) need approval from the city or county.
There are a variety of factors to consider while undertaking a painting job.In order to determine which blasting method is best for a certain application, it is necessary to review the project parameters, substrate condition, technical data sheets, and application techniques.
When in doubt, it’s always a good idea to consult with specialists for guidance. More info on Vertidrive.com.